We repair all brands/models stoves in Kenmore such as Sears stoves,
Whirlpool stoves, GE stoves, Sunray stoves, Amana stoves and many
more. (view the complete brands list
we work on). We are open 24 hours a day, 7 days a week and there
is no extra charge for the weekend or night appointments. Our service
call is Free with the repair and all the work is guaranteed for
We provide stove repair to all Kenmore zip codes and
surrounding cities. The following areas correspond to our Appliance
view the rest service areas
View the list of our service areas.
We have been in Appliance Repair business for eight years. For immediate Kenmore stove repair service
call us 24/7 out our toll free number:
You can also can contact us by the email
for your Kenmore stove repair. Just send us your name, a brief description
of the stove problem and your contact information.
Please read these preventative and easy-to-repair tips.
However if your stove problem cannot be resolved with our easy tips,
consider calling us for an appointment. We will be happy to help.
ADJUSTING GAS STOVE BURNERS FOR MAXIMUM EFFICIENCY
STOVE PROBLEM: The flame on one of the stove burners of your gas range has changed color.
A gas stove normally gives off blue flame. A yellow flame indicates that a stove burner is not functioning properly. A yellow flame also burns cooler than a blue flame, so food will take longer to cook. One of two stove malfunctions will cause a stove burner to show a yellow flame: either the ports of the stove burner are clogged by food that has spilled onto the burner, or the air control shutter needs adjustment.
To restore a stove burner to peak efficiency, do the following:
I. Remove the affected burner from the stove by pulling it from its place, and wash it in soapy water
2. There are a series of tiny holes, called ports, around the base of the stove burner. Use a toothpick to loosen and remove food deposits that may be clogging these ports.
3. Let the stove burner dry fully before placing it back into the range. Turn on the stove. If the flame is still yellow, adjust the air-control shutter as follows:
a. Turn the stove burner control to High.
b. Loosen the air-control shutter screw.
c. Slide the air-control shutter in one direction and then in the other, until the flame turns blue.
d. Tighten the air-control shutter screw.
4. With the stove burner control still on high, place a pan containing a little water onto the burner and check the height of the flame. It should end just below the bottom of the pan, no more than 1/s inch away. If the flame touches the pan, it means receptacles placed oil thestove burner with the burner control on high can be scorched and food will burn. Conversely, if the length of the flame is too short, food will take longer to cook. To adjust the height of the flame, locate (if you can) the surface-control screw on the gas delivery tube to the burner. Turn this stove control screw clockwise to increase the length of the flame. Turning this screw counterclockwise will lower the flame.
REPAIRING A STOVE BURNER PILOT
PROBLEM: One of the stove pilots on your gas range is out. You relight it with a match, but it constantly needs relighting.
If your gas stove doesn't have spark igniters, the burners are ignited by a gas-fed pilot. In some stoves, each burner has its own pilot in others, two burners share a pilot. If the pilot doesn't get enough gas, the pilot will keep going out. Turn the pilot adjustment screw counterclockwise at a time, using a screwdriver or an adjustable wrench. If the pilot won't stay lit, call a utility company or independent stove repair technician to make the repair
If you need professional assistance for your Kenmore stove repair
needs, call us 24/7:
Or send an appointment request online at email@example.com
To do so, please specify your name, address and a brief nature of
the stove problem. Once we receive your request we will contact
you as soon as possible.